Setup Gateway iGS03 Series Collie

Setup Gateway iGS03 Series Collie

Update firmware 

For IGS03, you need to ensure that the firmware version is the latest (v1.1.9.2), if the firmware version is below that or is an old version, you need to update the firmware by following the guide below.

Register New Gateway

  1. Click on Data Setup -> Beacon Device -> GATEWAY
  2. Click orange + nutton at right below side
  3. Fill in Name, Brand, Unique id/ Serial number device, then click SAVE
  4. Open again new registered gateway
  5. Login to Beacon Gateway in web browser, then setup the Application Settings like this
    1. Mode: MQTT Publish
    2. MQTT over TSL (MQTTS): Check
    3. Use Client Certificate: Uncheck
    4. Message Format: Plan text
    5. Appeand Timestamp: None
    6. Message Throttling: Uncheck
    7. Request Interval: 30 seconds
    8. Cache Full Handlling: Discard new input data
  6. Open the registered new gateway, copy Host URL, Host Port, Server Root CA, Public Topic, Username, Password, and Client ID from Collie - MQTT Account Details to Beacon Gateway - Application Settings.
  7. Click Save, then REBOOT

    • Related Articles

    • How to Setup Floor Plan on Collie

      Go to Data setup Click the Floor Plan menu Click add button “Register New Floor Plan” Fill in coloum floor plan name and attach image floor plan image Click on the path, zoom in on the location and draw a rectangle at your map location Can use scale, ...

    • Collie Release Notes v1.3.11

      Tuesday, 18 June 2024 What's New? Update Collie IoT Core Update Collie IoT core - Need to update firmware for Beacon Gateway (iGS03 Series) Upgrade firmware Ingics Beacon Gateway iGS03W, iGS03M Setup beacon gateway after update Setup Gateway iGS03 ...

    • How to Register Visitor by Collie Admin

      Register 1. Login collie first as administrator 2. Click Mainpower Management then select Visitor 3. Next to Button orange bottom right corner "" 4. Click button add "" 5. Make sure all the fields marked with an asterisk (*) are filled in, and fill ...

    • How to Register Staff by Collie Admin

      Register 1. Login collie first as administrator 2. Click Mainpower Management then select Staff 3. Next to Button orange bottom right corner "" 4. Click button add "" 5. Make sure all the fields marked with an asterisk (*) are filled in, and fill in ...

    • How to Register Worker by Collie Admin

      Register 1. Login collie first as administrator 2. Click Mainpower Management then select Worker 3. Next to Button orange bottom right corner "" 4. Click button add "" 4. Make sure all the fields marked with an asterisk (*) are filled in, and fill in ...