How to Setup Beacon Getway

How to Setup Beacon Getway

  1. Reset beacon getway, press the button for 5 second until the light turns red
     



  2. Connect to wifi, example wifi BLE-WIFI_66_2A
    (default password : 12345678)




  3. Check the Ip in your connection
    Click properties on the connected WiFi, then scroll to the bottom and copy IPv4Address




  4. Copy IPv4 addres di browser, dirrected to the beacon settings page





  5. WiFi settings, change WiFi mode to station, connect to WiFi that is connected to the internet, and then save.



  6. Go to Applications page,
    - Fill in the Client ID with the name of the getway beacon that you will register in Collie. 
    - Fill in the Host/Ip, Username and password that were previously provided by the Magicsoft Team.
    - Makesure Host/Ip, Port, Public Topic, Username, and Password are filled in.
    - Fill in the Request Interval with the 60 (in secs).
    - Click Save




  7. Make sure everything you have set is saved, then click Reboot.

  8. End the next steps, follow this How to Setup Floor Plan on Collie





    • Related Articles

    • How to Setup Floor Plan on Collie

      Go to Data setup Click the Floor Plan menu Click add button “Register New Floor Plan” Fill in coloum floor plan name and attach image floor plan image Click on the path, zoom in on the location and draw a rectangle at your map location Can use scale, ...

    • How to Register Beacon Getway on Collie

      Go to Data setup Click the Beacon Device menu Go to on page "GATEWAY" Click add button “Register New Beacon” - Name : the name of the location - Type : GATEWAY - Brand : Ingics / Minew - Unique Id : Can get this code at the beacon - Click save Click ...

    • How to Register Beacon Tag on Collie

      Go to Data setup Click the Beacon Device menu On page "TAG" Click add button “Register New Beacon” Fill in coloum according to the beacon that is set up Name : the name of the beacon Type : BEACON Brand : Ingics / Minew Unique Id : 2nd line of unique ...

    • How to Link Beacon to Personnel

      Go to Data Setup Choose Beacon Device menu On Beacon TAG page Search the beacon want link to personnel Click three dot button , select “Link to” Click assignment type, select personnel Choose worker or staff Look for registered worker or personnel ...

    • How to Link Beacon to Asset

      Before this, make sure the assets have been registered in collie or follow Register New Asset first Next, Go to Data Setup Choose beacon device menu On beacon TAG page Search the beacon want link to Asset Click three dot button , select “Link to” ...