How to Link Beacon to Personnel

How to Link Beacon to Personnel

  1. Go to Data Setup

  2. Choose Beacon Device menu


  3. On Beacon TAG page

  4. Search the beacon want link to personnel


  5. Click three dot button , select “Link to”


  6. Click assignment type, select personnel

  7. Choose worker or staff

  8. Look for registered worker or personnel and select

  9. Then click save


  10. The beacon is linked to the worker or personnel



    If the beacon is not registered, follow   Setup Beacon on Collie  first

    • Related Articles

    • Assign and Unassign Personnel

      How to Assign Visitor to an Area Under Attendance, click on Area On the bottom right corner, click on Add Assignment  Fill in the fields and click assign   Personnel is assigned to the Area How to Unassign Visitor for Area Login to VMS    Click on ...

    • How to Link Beacon to Asset

      Before this, make sure the assets have been registered in collie or follow Register New Asset first Next, Go to Data Setup Choose beacon device menu On beacon TAG page Search the beacon want link to Asset Click three dot button , select “Link to” ...

    • How to Register Beacon Tag on Collie

      Go to Data setup Click the Beacon Device menu On page "TAG" Click add button “Register New Beacon” Fill in coloum according to the beacon that is set up Name : the name of the beacon Type : BEACON Brand : Ingics / Minew Unique Id : 2nd line of unique ...

    • How to Setup Floor Plan on Collie

      Go to Data setup Click the Floor Plan menu Click add button “Register New Floor Plan” Fill in coloum floor plan name and attach image floor plan image Click on the path, zoom in on the location and draw a rectangle at your map location Can use scale, ...

    • How to Setup Beacon Getway

      Reset beacon getway, press the button for 5 second until the light turns red Connect to wifi, example wifi BLE-WIFI_66_2A (default password : 12345678) Check the Ip in your connection Click properties on the connected WiFi, then scroll to the bottom ...